Tag Archive: drive

See Like an Owl When You Drive!

Driving high speeds is exciting and sometimes it’s a guilty pleasure, especially for those who enjoy driving with the point of crossing towards racing in the future. Although it’s not really wise to travel at high speed, it can’t be denied that if only we were not as limited as having poor night vision, people could probably go for a more decent speed at night. Travelling at night in wide highways from one place to another can be dangerous. In fact a huge number of vehicular accidents occur at night times and most of them are through driving. Travelling by air is actually considered to be the safest means of travelling and the most prone to accidents is travelling by road. But people don’t need to become an owl to see perfectly at night while they drive, they can just enhance their automobiles with the use of HID Bulbs. With these bulbs drivers can now see at night more clearly which secures them because of the amount of light emitted through these bulbs.

Many thanks go to BMW for inventing HID Light Bulbs. Since then driving has become safer and more secure, especially at night. These bulbs that were invented by the German Automobile company contain a gas called Xenon that allows the bulbs to produce a sufficient amount of light which is comparably brighter than its predecessors. From the definition of HID which means High Intensity Discharge, the bulbs itself produces a very bright light which usually comes out in a blue a blue or white shade although most manufacturers are developing new colors. Like other products, they vary from one manufacturer to the other including prices because there are cheap as well as very expensive hid kits.

With the use of these bulbs, users are given many advantages. Aside from adding security to drivers and passengers alike with its bright light, the use of such is also proven to be economical as well. The Xenon component allows the German creation to produce a sustainable amount of light at a minimum amount of power. Despite this sustainable amount of light being emitted, the bulb only uses minimum amount of power thus consuming less fuel.

The thrill of having to go for a speedy rate at night will not worry anyone anymore with the use of HID bulbs. It secures driving at night because your vision is as clear as that of an owl and it allows you to save on fuel consumption! Its one light that maximizes its use at the same time minimizes its cost!

Knowing The Parts of The Vehicle You Drive

When you sit for an HGV driver training course exam at any truck school or any other such institution, you will be asked to identify each of the parts of your vehicle and you will be asked to explain the pros and cons of those parts. The HGV training course that you have enrolled in will usually prepare you for this part of the test. Nevertheless, here are a few important parts you should be well aware about.

At the front of the vehicle are the lights, steering box and linkage. Check the lights for clean lenses, missing screws, cracks and condensation. Make sure the signal lights and head lights are working properly. Check the steering box for any missing bolts or any leaks from the steering fluid. Also check the steering linkage point for bends, cracks, non-factory welds and proper lubrication.

In the engine compartment, the oil, coolant and power steering fluid levels need to be checked. You need to pull out the oil dipstick, clean it and insert again to check oil level. If there are no proper line markings to determine coolant level, simply mention that the radiator cap can be removed to check the level. Do not however actually remove the cap. The water pump and air compressor also need to be checked for faults. Make sure there are no leaks under any of the engine components.

Once you get inside the vehicle you will have to start the engine before you check the clutch/gears, air and oil pressure gauge, voltmeter, air brake, steering and the hydraulic and parking brakes. Make sure the gears fall into place and the clutch should not play for more than two inches. The gauges should be checked for cleanliness and cracks. A minimum of 100PSI air pressure should be built in and the oil pressure should be normal just a few seconds after the engine has started. In cases where the oil gauge is not there, identify a warning light to indicate system failure. The air brake should be checked by building the pressure up, switching off the engine, releasing all brakes and pressing hard on the foot brake and holding it for one minute. Furthermore, mirrors, wipers and horns should be checked if they are correctly functioning. Finally, to check the parking brake put the vehicle on low gear and slowly let go of your foot from the brake and if the vehicle does not move then the brakes are working fine.

How To Drive On Ice To Avoid Having A Road Traffic Accident

In order for your car to continue to be under your control and also not shed grip, you need to maintain your rate sluggish. When taking a turn, bring your car to a really sluggish rate so that the car does not skid. Icy roadways could be complicated as well as the driver requires to be experienced and also exercised due to the fact that it is the driver that manages the car.

In order for your car to continue to be under your control and also not shed grip, you ought to maintain your rate slow-moving. When taking a turn, bring your car to a really slow-moving rate so that the car does not skid. You must adhere to all the instructions and also cautions on the roadway and also must be mindful of the capacities of your car so that you are able to utilize the attributes when the requirement emerges. Also if your car is a 4 wheel drive, it does not indicate that it is totally secure from skids or various other points triggered due to icy problems. Icy roadways could be challenging and also the driver requires to be experienced and also exercised due to the fact that it is the driver that takes care of the car.

Social media & sharing icons powered by UltimatelySocial